2016 2017 2018 2019 Toyota Tacoma Gentex Homelink V4 Mirror Accessories

Description

2016 2017 2018 2019 (
This
W
ill
N
ot
W
ork
F
or
T
h
e
2
0
2
0
or 2021
Tacoma
.
The
wiring
is
different
even
though
it
looks
the
same
.
)
Toyota Tacoma Gentex Version 4 Homelink Blue Compass Rear View Mirror with blue back lit buttons, with autodim. This is the  same color blue that is in the Tacoma trucks. Your truck needs to already have the autodim mirror for this to work. This mirror is a plug and play and has 12 pin / 3 wire connector on the back, no need to worry about splicing wires together.  These homelink mirrors work so much better than the cheap clip on your visor remotes. The mirror has been tested and is great used condition. You are getting the actual mirror that is pictured.  This is a Version 4 and should work with most homelink devices.  For compatibly and program instructions for your garage door visit https://homelink.com. To install disconnect the wiring connector from the back of the mirror by pinching the top of the connector and pulling out.  Slide down the black plastic wire cover over its self.  Use a T20 torx screwdriver to remove the screw and slide the mirror up to remove.  To install do in the reverse order.  DO NOT over tighten the screw you could crack your windshield. All you need to do is to program the homelink buttons. And to recalibrate the compass see your owners manual.  This is a 10 minute installation but if you are not comfortable installing the mirror take it to your local mechanic or dealer. If you have problems  programming the homelink please contact me before asking for a return.